- Store
- >
- New
- >
- Rheometers & Viscometers & Flash Point Testers
- >
- Brookfield
- >
- Ametek Brookfield Dial Reading Viscometer
Ametek Brookfield Dial Reading Viscometer
AMETEK Brookfield’s original Dial Reading Viscometer has been the lab standard used around the world since 1934. Now offered with multi-speed electronic drive and ergonomically designed speed control knob for ease of use.
Featuring quiet operation and greater versatility with universal power supply, facilitating the use of worldwide power sources.
The direct-drive design results in extremely quiet operation and greater versatility while the universal power supply facilitates the use of worldwide power sources.
FEATURES & BENEFITS
- Continuous torque sensing capability
- Torque measurement accuracy: 1% of full scale range
- Repeatability: 0.2% of full scale range
- Easy speed adjustment and on/off control
- Compatible with all Brookfield accessories
- NIST traceable viscosity standards available
- Electronic drive means quiet, reliable operation
- Traditional Brookfield quality
- LV is for low viscosity materials and can measure the thinnest materials. Typical examples include inks, oils, and solvents.
- RV is for medium viscosity materials than those measured with an LV torque. Typical examples include creams, food, and paints.
- HA is for higher viscosity materials than those measured with an RV torque. Typical examples include gels, chocolate and epoxies.
- HB is for even higher viscosity materials than those measured with an HA torque spring. Typical examples include asphalt, caulking compounds, and molasses.
VISCOSITY RANGE cP(mPa·s) | SPEEDS | |||
MODEL | Min. | Max. | RPM | Number of Increments |
LVT | 1 † | 2M | .3-60 | 8 |
RVT | 100 †† | 8M | .5-100 | 10 |
HAT | 200 †† | 16M | .5-100 | 10 |
HBT | 800 †† | 64M | .5-100 | 10 |
† 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles.
††Minimum viscosity is achieved with optional RV/HA/HB spindle.
M=1 million cP=Centipoise mPa·s=Millipascal·seconds
SPRING TORQUE
SPRING TORQUE | ||
MODEL | Dyne-cm | Milli Newton-m |
LVT | 673.7 | 0.0673 |
RVT | 7,187.0 | 0.7187 |
HAT | 14,374.0 | 1.4374 |
HBT | 57,496.0 | 5.7496 |
† 1 cP achieved with UL Adapter accessory. 15 cP on LV with standard spindles.
††Minimum viscosity is achieved with optional RV/HA/HB spindle.
B=1 Billion M=1 million cP=Centipoise mPa·s=Millipascal·seconds
- Instrument
- 6 spindles (RV/HA/HB)
- or 4 spindles (LV)
- Spindle Guard Leg*
- Lab Stand (Model G)
- Carrying Case