Jerome 651-Hydrogen Sulfide Monitoring System
Gold Film Fence-line Hydrogen Sulfide Monitoring System
- Autonomous: The 651 is designed for set-and-forget hydrogen sulfide monitoring, inside or out.
- Wireless: Measurement data is transmitted wirelessly from 651 stations to the user’s PC.
- Rugged: The 651 is housed in a steel casing, insulated, air-conditioned, and ready for nearly any environment.
Lead Time: Vary by Product
| 651-brochure-2019.pdf |
Jerome 651-Hydrogen Sulfide Monitoring System
Description
Gold Film Fence-line Hydrogen Sulfide Monitoring System
The Jerome® 651 monitoring system from AMTEK Brookfield is the system you need to solve your hydrogen sulfide monitoring problems. Designed to provide long-term monitoring even in extreme weather conditions, it can be stationed at any location. Multiple units can be linked to form a perimeter monitoring system. Data logging and radio telemetry capabilities make downloading data convenient and easy from a remote PC.
- Autonomous: The 651 is designed for set-and-forget hydrogen sulfide monitoring, inside or out.
- Flexible: A detachable hand-held hydrogen sulfide analyzer is contained within the unit for pinpointing a gas source.
- Smart Alarms: Define alarm points that meet your needs and receive email notifications and warnings.
- Wireless: Measurement data is transmitted wirelessly from 651 stations to the user’s PC.
- Rugged: The 651 is housed in a steel casing, insulated, air-conditioned, and ready for nearly any environment.
Features and Benefits
- Perimeter Monitoring: Multiple Jerome® 651 units can be linked to form a perimeter monitoring system to help locate the source of H2S and ensure safety and compliance.
- Detachable Unit: Quickly and easily sweep an area for hydrogen sulfide hot spots with the detachable, hand-held Jerome® 631-X hydrogen sulfide analyzer.
- Gold Film Sensor: Validated in the field and in the lab for over 35 years, our proprietary gold film sensor ensures repeatable results across a wide range of applications.
- Weather Station: An attached weather station monitors outside temperature as well as wind speed and direction for increased accuracy in pinpointing the source of odor contamination.
- Data Transmission: Advanced data logging and radio telemetry capabilities make downloading data to a remote PC easy and convenient.
- PC Software: Intuitive PC software with user-selectable time-weighted average reporting and a site view tab give users a bird’s eye view of the monitoring system as a whole.
- Programmable Alarms: The 651 comes with programmable alarms that automatically send email alerts if your H2S levels rise above your specified upper limit.
- Temperature Controlled Interior: Resistive heating and thermoelectric cooling keep the interior of the 651 at a consistent temperature for increased accuracy.
- Regulatory Compliance: The 651 is in active use by many regulatory agencies and landfills, water treatment, and wastewater management facilities across the world.
Specifications
Detection Range: | 3 ppb (0.003 ppm) to 50 ppm |
Resolution: | 0.001, 0.01, 0.1, and 1 ppm |
Accuracy: | ±0.005 ppm at 0.05 ppm |
Sample Intervals: | 1, 2, 5, 10, 15, 30, 60 or 120 minutes |
Regeneration Intervals: | 6, 12, 24 and 48 hours |
Flow Rate: | 150 mL/min |
Operating Environment: | -40 to +55°C, non-explosive, 0-100% relative humidity |
Result Units: | ppm, ppb |
Data Storage Capacity: | 50,000 readings |
Power Requirements | 100-120 VAC, 50/60 Hz, 7 A or |
Control Board Fuse: | Fast-acting IEC 1.6 A 250 V, 5 mm x 20 mm |
Case Construction: | Polyester with insulation to reduce heat transfer |
Battery | Rechargeable NiCad |
Estimated Sensor Life: | 3 to 6 months depending on operating conditions |
Display: | 8 digit alphanumeric LCD |
Output: | Nano Radio |
Dimensions: | 26″ W x 25″ H x 9″ D |
Weight: | 52 lbs. (24 kg) |
Warranty: | 1 year, factory parts and labor except for the 631-X sensor |
Nano Radio Modem Specifications
| Frequency: | 2.4 – 2.4835 GHz (2400 MHz) 49 selectable channels |
| Serial Interface: | RS-232 |
| Power Requirements: | 10-30 VDC, 450 mA |
| Operating Temperature: | -40°C to 75°C |
| Range: | Up to 4 miles (6.4 km) “line of sight.” Longer distances may be obtainable through use of a high gain antenna or by using the optional Radio Repeater |