Scinteck Instruments
  • Store
  • About Us
  • Contact Us
  • Downloads
  • Store
  • >
  • New
  • >
  • Mixers, Rockers, & Shakers
  • >
  • Benchmark Scientific
  • >
  • Benchmark Scientific Benchmixerâ„¢ XLQ Multi-Tube Vortexer for QuEChERS

Benchmark Scientific Benchmixerâ„¢ XLQ Multi-Tube Vortexer for QuEChERS

SKU: BV1010-TST
$2,889.00
$2,889.00
Unavailable
per item
  • For use with QuEChERS and other sample prep methods
  • Powerful, hands-free shaking/vortexing
  • Pulsing program for interval mixing
  • Supplied with QuEChERS rack starter kit: 7 x 50ml tubes, held horizontally 50 x 15ml tubes, held vertically 50 x 1.5/2.0ml tubes, held vertically
Add to Cart

Foam Sheet, no holes

$37.25

Tube Rack, 96 x 0.5ml (8mm)

$37.25

Tube Rack, 50 x 12mm

$37.25

Tube Rack, 50 x 13mm

$37.25

Tube Rack, 50 x 15ml (16.5mm)

$37.25

Tube Rack, 50 x 1.5/2.0ml (10mm)

$37.25

Tube Rack, 15 x 25mm

$37.25

Tube Rack, 15 x 50ml (29mm)

$37.25

Tube Rack for 7x50ml QuEChERs, horizontal

$36.00

Benchmark Rack for up to 3 microplates for BV1010 and BV1010-TST

$143.00

Rack for 96 x 0.2ml tubes or strips (3pk)

$38.25
  • Overview
  • Specifications
  • Downloads
<
>
Benchmark’s BenchMixer XLQ Multitube Vortexer been designed for use in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications.

Multiple samples can be processed simultaneously in the BenchMixer XLQ’s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches.

The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisely controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor.
​
Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours.
While the BenchMixer XLQ is configured primarily for QuEChERS protocols, additional racks are available to accommodate nearly any type of vessel commonly found in the laboratory (ask for details). Built for heavy-duty use, the instrument carries a 2 year warranty.
Speed Range
500 -2500 rpm ​
Operating Modes
1 min. to 99 hr. 59 min. ​
Orbit
3.6mm ​
Dimensions (in)
15 x 9.2 x 16.5 ​
Dimensions (cm)
38.5 x 23.5 x 42 ​
Operating Temp
12 x 7 in. / 30 x 17.8 cm ​
Weight
29lbs (13kg) ​
Electrical
100 to 240V 50-60Hz; 60W ​
Warranty
2 Years

Documents


Brochure

Company

About Us


Support

Contact Us
Terms of Use
© 2021 Scinteck Instruments, LLC. All Rights Reserved
  • Store
  • About Us
  • Contact Us
  • Downloads