Scinteck Instruments
  • Store
  • About Us
  • Contact Us
  • Downloads
  • Store
  • >
  • New
  • >
  • Furnace, Incubator, Oven, Autoclave & Sterilizers
  • >
  • Memmert
  • >
  • Convection Incubators IN Series, Single DISPLAY Memmert

Convection Incubators IN Series, Single DISPLAY Memmert

SKU:
$1,532.00
1532 8448 $1,532.00 - $8,448.00
Unavailable
per item

Highly sensitive, extremely accurate: Memmert lab incubator


Special Order Item: No refunds or cancellations

Add to Cart
  • Overview
  • Specifications
<
>
In the laboratory, the Memmert incubator I is ideal for all applications with temperatures up to +80°C – specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.

Memmert incubator I – a gentle force in the laboratory

To guarantee optimum air circulation in the incubator chamber even when it is fully loaded, both model variants SingleDISPLAY and TwinDISPLAY are available with an adjustable air fan. Since our unique all-round surface heating is optimally geared to both natural convection and forced air circulation, the fan can be switched off entirely for sensitive samples and for samples which may not be exposed to air turbulence.

​A Memmert incubator offers unique advantages

  • intuitive and easy-to-use operating menu
  • air exchange rates and air flap position electronically controllable
  • temperature ramps programmable via AtmoCONTROL software (models with TwinDISPLAY)
  • pre-heated fresh air prevents temperature fluctuations
  • almost exclusive use of high-quality, corrosion-resistant and easily cleanable stainless steel for the working chamber and housing
  • heating concept specifically adapted for a precise and homogenous temperature control
  • a wide range of options for programming and documentation using interfaces, integrated data logger and software AtmoCONTROL
  • 3 years guarantee worldwide

Standard Units are safety-approved and bear the test marks

Picture
Picture
Picture
Picture
Picture

Temperature

Setting temperature range
+20 to +80 °C
Working temperature range
at least 5 above ambient temperature to +80 °C
Setting accuracy temperature
0.1 °C
Temperature sensor
1 Pt100 sensor DIN class A in 4-wire-circuit

Control Technology

Language setting
German, English, Spanish, French, Polish, Czech, Hungarian
ControlCOCKPIT
Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
Timer
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT
the process time does not start until the set temperature is reached
Calibration
three freely selectable temperature values
adjustable parameters
temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

Convection
natural convection
Fresh air
Admixture of pre-heated fresh air by electronically adjustable air flap
Vent
vent connection with restrictor flap

Communication

Documentation
programme stored in case of power failure
Programming
AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).

Safety

Temperature control
adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system
for fault analysis

Standard Equipment

Door
fully insulated stainless steel door with 2-point locking (compression door lock)
Internals
1 stainless steel grid(s), electropolished
Works calibration certificate
incl. works calibration certificate for +37°C
Door
inner glass door

Stainless Steel Interior

Interior
easy-to-clean interior,made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Volume
IN30: 32 l
IN55: 53 l
IN75: 74 l
IN110: 108 l
IN160: 161 l
IN260: 256 l
IN450: 449 l
IN750: 749 l
Dimensions
(W x H x D)
IN30: 400 x 320 x 250 mm
IN55: 400 x 400 x 330 mm
IN75: 400 x 560 x 330 mm
IN110: 560 x 480 x 400 mm
IN160: 560 x 720 x 400 mm
IN260: 640 x 800 x 500 mm
IN450: 1040 x 720 x 600 mm
IN750: 1040 x 1200 x 600 mm
Max. number of internals
IN30: 3
IN55: 4
IN110: 5
IN75: 6

IN160/IN450: 8
IN260: 9
IN750: 14
Max. loading of chamber
IN30: 60 kg
IN55: 80 kg
IN75: 120 kg
IN110: 175 kg
IN160: 210 kg
IN260/IN450/IN750: 300 kg
Max. loading per internal
IN30/IN55/IN75/IN110/
​
IN160/IN260: 20 kg

IN450/IN750: 30 kg

Textured stainless steel casing

Dimensions
(W x H x D)
IN30: 585 x 704 x 434 mm (d +56mm door handle)

IN55: 585 x 784 x 514 mm (d +56mm door handle)

IN75: 585 x 944 x 514 mm (d +56mm door handle)

IN110: 745 x 864 x 584 mm (d +56mm door handle)

IN160: 745 x 1104 x 584 mm (d +56mm door handle)

IN260: 824 x 1183 x 684 mm (d +56mm door handle)

IN450: 1224 x 1247 x 784 mm (d +56mm door handle)

​IN750: 1224 x 1720 x 784 mm (d +56mm door handle)
Installation
IN30/IN55/IN75/IN110/
​
IN160/IN260: N/A

IN450/IN750: on lockable castors
Housing
rear zinc-plated steel

Electrical data

Voltage Electrical load
230 V, 50/60 Hz
IN30: 1600 W
IN55: 1000 W
IN75: 1025 W
IN110: 1400 W
IN160: 1600 W
IN260: 1700 W
IN450: 1800 W
IN750: 2000 W
Voltage Electrical load
115 V, 50/60 Hz

​IN30: 800 W

IN55/IN75/IN110/
​
IN160/IN260: 900 W

IN450: 1500 W

IN750: 1800 W

Ambient conditions

Set Up
The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Altitude of installation
max. 2,000 m above sea level
Ambient temperature
+5 °C to +40 °C
Humidity rh
max. 80 %, non-condensing
Overvoltage category
II
Pollution degree
2

Packing/shipping data

Transport information
The appliances must be transported upright
Customs tariff number
8419 8998
Country of origin
Federal Republic of Germany
WEEE-Reg.-No.
DE 66812464
Dimensions approx incl. carton
​(W x H x D)
IN30: 660 x 890 x 650 mm
IN55: 730 x 950 x 670 mm
IN75: 730 x 1130 x 670 mm
IN110: 830 x 1050 x 800 mm
IN160: 830 x 1300 x 800 mm
IN260: 930 x 1380 x 930 mm
IN450: 1330 x 1440 x 1050 mm
IN750: 1330 x 1910 x 1050 mm
Net weight
IN30: 48 kg
IN55: 57 kg
IN75: 66 kg
IN110: 76 kg
IN160: 96 kg
IN260: 110 kg
IN450: 161 kg
IN750: 217 kg
Gross weight carton
IN30: 64 kg
IN55: 76 kg
IN75: 85 kg
IN110: 101 kg
IN160: 122 kg
IN260: 161 kg
IN450: 227 kg
IN750: 288 kg

Company

About Us


Support

Contact Us
Terms of Use
© 2021 Scinteck Instruments, LLC. All Rights Reserved
  • Store
  • About Us
  • Contact Us
  • Downloads