First responders to network emergencies rely on the Fluke EtherScope Series II Network Assistant to solve problems fast - a handheld portable network troubleshooter for 10, 100 and Gigabit copper, fiber and wireless LANs. It combines essential tools that help frontline network professionals quickly solve the wide range of problems they encounter.
LAN and Wi-Fi network installers rely on the Fluke EtherScope Series II Network Assistant to complete projects on-time and within budget. Whether it is testing and troubleshooting during the installation or upgrade, or validating LAN operation by verifying network services and measuring Ethernet performance after the install, the Fluke EtherScope installation assistant is up to the task.
LAN and Wi-Fi network installers rely on the Fluke EtherScope Series II Network Assistant to complete projects on-time and within budget. Whether it is testing and troubleshooting during the installation or upgrade, or validating LAN operation by verifying network services and measuring Ethernet performance after the install, the Fluke EtherScope installation assistant is up to the task.
- Analyze Gigabit and Wireless LANs to solve problems fast
- 10/100/Gig twisted pair LAN interface
- Gigabit fiber SFP LAN interface
- 802.11 a/b/g wireless LAN analysis
- Monitor network traffic and switch interfaces
- Discover devices, networks, VLANs, access points, mobile clients and more
- RFC 2544 and ITO network performance measurement
Weight, with battery |
0.86 kg (1.9 lb) |
Dimensions |
19.1 x 15.2 x 4.4 cm (7.5 x 6.0 x 1.75 in) |
Display |
LCD touch screen, 640 x 480 pixels, TFT (active) color panel, touch pad |
LED Indicators |
6 (including power LED) |
Battery |
Lithium Ion 7.2V DC (nominal), 4.2Ah, removable/rechargeable |
Battery Life |
4 hr typical, 10 hr in standby mode |
External AC Adapter/Battery Charger |
AC input: 90 to 264 V ac, 48 to 62 Hz; 1.5 A DC output: 15 V dc, 1.2 A (isolated output) |
Operating Temperature |
0° to +40°C (32° to 104°F) with up to 95% relative humidity |
Storage Temperature |
-20° to +60°C (-4° to 140°F) |
Shock & Vibration |
Meets requirements of MIL-PRF-28800F for Class 3 equipment |
Safety |
CSA Canada and United States, CE, FCC Part 15 Class A, C-TICK N10140; UL and CSA approvals for universal AC adapter |
EMC |
Complies with EN61326, Class A, Criteria C |
Cable Types |
Unshielded twisted pair LAN cables (100 and 120 Ohm UTP), Foil-screened twisted pair LAN cables (100 and 120 Ohm ScTP) |
Cable Length |
1 to 305 m (3 to 1000 ft), accuracy dependent upon the cable type selected |
Length Resolution |
± [5% of reading + 1 m (3 ft)], with open, shorted, with wire map adapter, or terminated with reflection ≥ 20% |
Receive Level |
100 to 5000 mVp-p |
Datalink Signal |
500 to 4000 mVp-p |
Power over Ethernet (PoE) |
Solicit for IEEE 802.3af PoE, measure DC voltage (mV) on each pin, remove solicitation |
- The analyzer supports the Fluke Networks DSP-FOM optical power meter. Connection to the DSP-FOM is through the RF-45 Ethernet connection.
Authentication Types |
LAN: 802.1X, WLAN: 802.1X, 802.11i, WEP, WPA, WPA2 |
EAP Types |
TLS, GTC, MD5, MS-CHAP-V2, LEAP, PEAP-GTC, PEAP-MD5, PEAP-MS-CHAP-V2, PEAP-TLS, TTLSPAP, TTLS-CHAP, TTLS-MS-CHAP, TTLS-MS-CHAPV2, TTLSEAP-MD5, TTLS-EAP-GTC, TTLS-EAP-MSCHAP-V2, TTLSEAP-TLS |