| mettler_me-te_brochure.pdf |
The Mettler-Toledo ME54TE analytical balance has a capacity of 52 grams and a readability of 0.1 milligrams with a pan size of 90 millimeters (3.5") diameter. Mettler-Toledo ME-TE Analytical Balances provide Essential Functionality and Solid Performance. Every lab needs a balance that combines essential weighing functions with ease of use to deliver accurate, reliable results day after day. METTLER TOLEDO's ME-TE analytical balances are ideal for your lab's sensitive yet routine weighing procedures. An intuitive touchscreen makes daily tasks as simple as possible while built-in features give operators everything they need to weigh with the accuracy, repeatability and traceability required. The metal base and a high quality finish make ME-TE robust enough for tough environments and the smooth surfaces make it easy to clean. This precise scale is built to perform - and last!
- 4.5" large color TFT display
- Touchscreen operation
- Intuitive interface with user guidance
- 4 freely-defineable IDs per sample e.g. user, sample
- Passcode protection
- Built-in overload protection
- Built-in RS232, USB device, USB host
- Bluetooth optional
- 8 embedded applications including formulation and statistics
- Documentation according to ISO/GLP requirements
- Supports under floor weighing
| Capacity | 52 g |
|---|---|
| Readability | 0.1 mg |
| Pan Size | Ø90 mm (3.5") |
| Repeatability (at nominal load) | 0.1 mg |
| Linearity deviation (test load) | 0.2 mg (10g) |
| Sensitivity temperature drift | 2 ppm/°C |
| Typical Values | |
| Repeatability (at nominal load) | 0.08 mg |
| Linearity deviation | 0.06 mg |
| Eccentricity deviation (test load) | 0.1 mg (20g) |
| Sensitivity offset (test weight) | 0.1 mg (50g) |
| Minimum sample weight (acc. to USP) | 160 mg |
| Minimum sample weight (u=1%, k=2) | 16 mg |
| Settling time | 2 seconds |
| Operating temperature range (storage) | +5 to 40°C (−25 to 70°C) |
| Relative air humidity | 10% up to 80% at 31°C, linearity decreasing at 50% at 40°C, noncondensing |
| Calibration | External calibration |
| Interfaces | RS232, USB device, USB host, Bluetooth (optional) Includes PC-Direct data transfer |
| Power | 100V-240V, ±10%, 50/60Hz, 0.3 A |
| Physical dimensions (W x D x H) | 210 x 344 x 344 mm (8.3" x 13.5" x 13.5") |
| Weight | 5.3 kg / 11.7 lbs |
| Usable height of draft shield | 238 mm / 9.37" |
| Display | 4.5" large color TFT touchscreen |
| Weighing applications | Formulation, counting, percent weighing, totaling, factor weighing, dynamic weighing |