Thermo TRACE GC Ultra with Thermo DSQ II MS and AS 3000 Auto Sampler and computer
System Includes:
- Thermo Electron / Scientific TRACE GC Ultra
- Thermo Scientific DSQ II MS
- Thermo Electron /Scientific AS 3000 Auto Sampler
- Computer
- Cables and connectors
- AS IS
Ask for Quote
Thermo Electron TRACE GC Ultra with Thermo DSQ II MS and Thermo AS 3000 Auto Sampler
System Includes:
- Thermo Electron / Scientific TRACE GC Ultra
- Thermo Scientific DSQ II MS
- Thermo Electron /Scientific AS 3000 Auto Sampler
- Computer
- Cables and connectors
The TRACE GC Ultra is the new multi-channel gas chromatograph platform, developed as the solution to the GC market’s evolving requirements!
Besides offering the most complete range of proprietary inlets, sensitive detection systems, smart accessories, and ancillary devices, the Ultra platform is the FIRST commercially available instrument featuring two new technologies able to raise the standard of Speed and Sensitivity in Gas Chromatography!
The Thermo Electron TRACE GC Ultra is built around the recognized quality, reliability and ruggedness of the established TRACE GC. Ultra performance, reliability, and usability make this a must-have GC for any laboratory. Automated features result in a tremendous increase in sample throughput, with analyses performed up to 30 times faster than before, without compromises in precision.
Attachments
Column Oven
- Programmability: 7 Ramps/8 Plateaus.
- Temperature range: few degrees above ambient to 450 °C.
- Maximum Temperature ramp: 120 °C/min.
- Typical heat-up: from 50 °C to 450 °C in 420 seconds.
- Typical cool down: 450 °C to 50 °C in 250 seconds.
- Sub-ambient: -99 °C with liquid N2, -55 °C with CO2 options.
- Injectors Vaporizing Inlets: SSL, Packed, Purged Packed,B.E.S.T. PTV
- Temperature range: 50-400 °C
- Heating rate: Up to 14.5 °C/sec (870°C/min).
- Programmability: 3 ramps/4 plateaus. Air-cooled down to few degrees above ambient temperature.
- Sub-ambient: -50 °C with liquid N2 , -30°C with CO2 options.
- Non-Vaporizing Inlets: Cold, On-column Septumless injector. No heating of the injector is required. Suitable for manual and automated operations.
Cryogenic coolant not required.