ViscoQC 300 Rotational Viscometer

SKU:
$6,475.40
674.4 6475.4 $674.40 - $6,475.40
Unavailable
per item

Do you need an easy-to-use viscometer that provides convenient operation for the most reliable and traceable viscosity results in your day-to-day work? ViscoQC rotational viscometers ensure the quality of your substance – from liquid to semi-solid. 

Eliminate the risk of measurement errors and free up your time and budget with the simplest spindle exchange mechanism, automatic spindle detection, automatic speed searching function for new formulations, and more.. Your existing SOPs can be easily converted if the same setup and settings are used.

It’s time to switch to an easier way. It’s time to switch to ViscoQC.

viscoqc_100-300_x.pdf
File Size: 928 kb
File Type: pdf
Download File
  • Key Features
  • Technical Specifications
<
>

Unpack your digital viscometer and measure right away

​The setup takes less than 2 minutes as ViscoQC comes pre-assembled when delivered, including a SOP booklet that introduces the first steps and simplifies user trainings. The built-in digital leveling automatically indicates correct leveling at start-up, before, during and after measurement which ensures highest accuracy. It prolongs the lifetime of your viscometer and reduces maintenance by protecting its bearings. For pharmaceutical customers, Anton Paar offers instrument qualification packages: ViscoQC is qualified and ready to use within one day by ensuring full compliance to 21 CFR Part 11, GMP, and GAMP 5 (ViscoQC 300 + V-Comply) or compliance to GMP, and GAMP 5 (ViscoQC 100).

​The easiest way to measure dynamic viscosity

You do not need to be an expert to measure with ViscoQC. Anton Paar’s viscometers guide you through – from start-up to the entire measurement process – via the intuitive user interface. Continue to use your standard operating procedure (SOP) methods of your existing rotational viscometer as ViscoQC will give you the same results by using the same instrument setup and measuring settings. Each spindle is equipped with magnetic coupling for easy spindle exchange to save up to 15 seconds per test. This coupling also further reduces maintenance costs by protecting the spindle and instrument against damage caused by knocks or bending. All spindles from Anton Paar are made of chemically resistant stainless steel (AISI 316L), which increases spindle lifetime by protecting them from corrosion.

Full traceability for reliable viscosity tests

Be confident in your results as for fully traceable results ViscoQC instantly detects and documents the measuring setup of the following parts:
  • Spindles by Toolmaster™ and spindle guard by TruGuard™
  • Temperature devices and sensors (PTD 80, PTD 175, Pt100)
  • Heli-Plus
To ensure correct viscosity results, all spindle data is automatically delivered to the viscometer, as soon as the spindle is attached. With ViscoQC 300 you can further restrict each method to the unique spindle identity thanks to Toolmaster™. Your uptime is maximized as no time is wasted for repeating measurements (e.g. if the wrong spindle was mistakenly chosen from the spindle list). If you need to measure new formulations, ViscoQC automatically leads you to the right spindle/speed configuration using TruMode™.

The most convenient way to generate and export data in viscosity quality control​

Every ViscoQC includes the V-Collect PC data collection software free of charge. As ViscoQC 100 does not store any data, results are directly exported to V-Collect or printed via the Dymo® LabelWriter™ after each test. ViscoQC 300 has a huge data memory for up to 999 measurements with up to 10,000 sub-measurements on 150 MB. Additionally it is possible to print and export data as PDF, CSV, or page printer (USB or network) to V-Collect and the Dymo® LabelWriter™. For automated data export, ViscoQC 300 can be integrated into your network via Laboratory Information Management System (LIMS) or FTP Server.
Whether you choose ViscoQC 100 or ViscoQC 300, these viscometers are future-proof as they grow with your evolving needs. To measure new paste-like formulations (e.g. wall putty), you can upgrade your instruments with the Heli-Plus and T-bar spindles. Gel time/pot life determination of e.g. adhesives is automatically possible with both models. If you need most accurate sample temperature control and have less than 20 mL of sample volume available, simply use the Peltier temperature device PTD 80. Further software functionality can be added to ViscoQC 300 with up to two optionally upgradeable software modules: V-Curve and/or V-Comply.
  • V-Curve adds real-time graph, analysis (e.g. yield point), programmability, and extended method functionality (e.g. with PTD 175)
  • V-Comply for compliance to 21 CFR Part 11 (e.g. audit trail, electronic signature), including qualification documentation
For automated sample name input, a bar code reader is available for ViscoQC 300.
OPTIONAL ACCESSOIRES: 
Temperature control solutions for ViscoQC, Temperature Devise PTD 80
  • For ViscoQC 100/300; viscometers and temperature device from a single source
  • Air cooling ensures small footprint, and reduces maintenance costs
  • Exact sample temperature control of, e.g. chocolate, adhesive
  • For routine QC applications from +15 °C to +80 °C (±0.1 °C)
Gesture Control 
  • Equips your density (and sound velocity) meter or viscometer for gesture-controlled operation
  • Interact with your device without touching it, e.g. when your hands are dirty or wet
  • Start and stop measurements, select methods, etc.
Accessory for ViscoQC 100/300, Flexible Cup Holder
  •  Ensures your sample is always centered in the right place
  • To easily center ½ pint, pint, quart containers, or 600 mL beakers
  • Easily mounted on instrument stand
  • Guarantees reproducible results
Motorized accessory for ViscoQC 100/300,  Heli-Plus
  • Convenient operation thanks to motorized stand instead of manual height adjustment
  • Measure paste-like materials (e.g. mayonnaise) with helical T-bar spindle movement
  • Simplest spindle exchange saves up to 15 seconds per measurement

Worldwide support for your viscometer guaranteed – at any time

  • Benefit from our exclusive extended three-year warranty program
  • At-site exchangeable sensor for minimum downtime in case of repair
  • Avoid manual wind-up procedure thanks to automatic bearing check by TruSine™
  • A free installation and operational qualification document is included in every delivery
  • Fast support ensured by Anton Paar's LiveChat
Viscosity Test
Single point
Multi-point
Viscosity range [mPa.s]
(depends on the measuring system)
L - 1* to 6M
R - 10** to 40M
​H*** to 320M
L - 1* to 6M
R - 3** to 40M
​H24*** to 320M
Speed [rpm]
0.1 to 200
25 increments: 19 standard speeds
plus 6 freely selectable speeds
0.01 to 250
​Speed list with 18 standard speeds Freely selectable speeds within the speed range​
Max. spring torque [mNm]
L - 0.0673
R - 0.7187
H - 5.7496
L - 0.0673
R - 0.7187
H - 5.7496
Accuracy
±1.0 % full scale range
​+15 °C to + 80 °C
(for DIN/SSA with PTD 80)
-45 °C to +175 °C
(for DIN/SSA/UL/4B2/L1D22 with PTD 175)
Repeatability
±0.2 %
​±0.2 %
​Display
​3.5” color LCD
​7” color touchscreen
​Data storage
​Non-storage Direct print/export
​Data memory for up to 999 measurements Print/export from data memory
*    With optional double-gap system DG26, with L1 spindle 15 mPa.s
**  With optional double-gap system DG26, with RH1 spindle 100 mPa.s
*** With optional double-gap system DG26, with RH1 spindle 800 mPa.s
M=1 million
  • L Model
  • R Model
  • H Model
<
>

Viscosity Ranges per Torque Model

Min. and max. viscosity are calculated values for L standard speeds (0.3 rpm to 60 rpm).
Spindle
Min. viscosity [mPa.s]
Max. viscosity [mPa.s]
L1
15
20,000
L2
50
100,000
L3
200
400,000
L4
1,000
2,000,000
CC12
20
37,900
CC18
5
11,400
CC26
2
3,800
DG26
1
2,600
CC12/D18
70
100,000
SC4-18
5
10,000
SC4-21
10
15,500
SC4-27
40
78,000

Vane Spindles

Min. and max. viscosity are calculated values at 10 rpm.
Spindle
Min. viscosity [mPa.s]
Max. viscosity [mPa.s]
V71
Not Recommended
Not Recommended
V72
104
1,040
V73
500
5,000
V74
5,090
50,900
V75
1,996
19,960

Viscosity ranges per torque model

Min. and max. viscosity are calculated values for RH standard speeds (0.5 rpm to 100 rpm, 0.3 rpm as min. for SC4-XY).
Spindle
Min. viscosity [mPa.s]
Max. viscosity [mPa.s]
RH1
100
20,000
RH2
100
80,000
RH3
100
200,000
RH4
200
400,000
RH5
400
800,000
RH6
1,000
2,000,000
RH7
4,000
8,000,000
CC12
120
50,000
CC18
40
50,000
CC26
15
24,400
DG26
10
10,000
CC12/D18
440
100,000
SC4-18
30
100,000
SC4-21
50
100,000
SC4-27
250
200,000

​Vane Spindles

Min. and max. viscosity are calculated values at 10 rpm.
Spindle
Min. viscosity [mPa.s]
Max. viscosity [mPa.s]
V71
262
2,620
V72
1,110
11,100
V73
5,330
53,300
V74
54,300
543,000
V75
21,300
213,000

Viscosity ranges per torque model

Min. and max. viscosity are calculated values for RH standard speeds (0.5 rpm to 100 rpm, 0.3 rpm as min. for SC4-XY).
Spindle
Min. viscosity [mPa.s]
Max. viscosity [mPa.s]
RH1
800
160,000
RH2
800
640,000
RH3
800
1,600,000
RH4
1,600
3,200,000
​RH5
3,200
6,400,000
​RH6
8,000
16,000,000
RH7
32,000
64,000,000
CC12
1,000
50,000
CC18
300
50,000
CC26
100
50,000
DG26
60
10,000
CC12/D18
3,500
100,000
SC4-18
250
50,000
SC4-21
400
100,000
SC4-27
2,000
200,000

​Vane Spindles

Min. and max. viscosity are calculated values at 10 rpm.
Spindle
Min. viscosity [mPa.s]
Max. viscosity [mPa.s]
V71
2,096
20,960
V72
8,880
88,800
V73
42,640
426,400
V74
434,400
4,344,000
V75
170,400
1,704,000

Company

About Us

Support

Contact Us
Terms of Use
© 2021 Scinteck Instruments, LLC. All Rights Reserved